From: John Williams <wj********@gmail.com>
Subject: Triumph Tappet adjuster locknut spanner.
Message Body:
Hello John.
Hope you are keeping well.
I’m after a Triumph Tappet adjuster locknut spanner for a 61 5TA.
I believe the part number is D370. Basicalit’sits a thin flat 3/16 Whit.
I have the square tappet adjuster, courtesy of yourself.
Hope you can help me out mate.
Kind Regards.
John Williams
From: John Thomas <jtclassicstainless@gmail.com>
Date: Tue, Apr 2, 2024 at 3:18 PM
Subject: Re: Classic Bike Parts UK “Triumph Tappet adjuster locknut spanner.”
To: <wj******@gmail.com>
Afternoon John, thanks for the enquiry, trust your keeping well my friend.
I don’t actually do the D370, From my Triumph Parts Tool Manual it is a combined 3/16″ X 1/4″ flat Whitworth spanner, the closest I do to that is my part number S439 a curved 3/16″ X 1/4″ Whitworth spanner in 5mm thick stainless ( originally designed for cylinder head,/barrel nut access) £11.45 plus p&p or if you should want to double it up with the 1/4″ X 5/16″ S440 £21.75 the pair plus p&p
Hope this is of help, best regards
John T. Classic Bike Parts UK
From: john williams <wj******@gmail.com>
Date: Tue, Apr 2, 2024 at 5:54 PM
Subject: Re: Classic Bike Parts UK “Triumph Tappet adjuster locknut spanner.”
To: John Thomas <jtclassicstainless@gmail.com>
Hi John, thanks for getting back to me so quickly.
As you can see from my image, I already have one of those from you for my barrel nuts, but forgot I had it (senior moment)! It works a treat as you can see. Along with your other tools.
Feel free to use the image on your site.
Good to hear from you again, will be in touch.
Take care my friend.
John.
