BSA A50 Extended Front Brake Arm Lever 65-5907
BSA A50 Extended Front Brake Arm Lever 65-5907. An extended front brake arm, to suit the single sided brake assembly.
ORIGINAL BRAKE ARM AND REAMER NOT INCLUDED
The part no. is for reference only, this arm is increased by 20mm on its centres (new centres 4- 5/16″) to give greater braking efficiency and feel.
The brake cable adjusting locknut may have to be refitted to below adjuster housing to allow for cable difference, and the outer cable abutment stop adjusting to suit the change in pull angle, though cable adjustment may be required.
It is to fit the 7/16 ” AF square section brake cam of the half width BSA hub models, the cable pin location is bushed and reamed for 1/4 ” clevis pin.
Comes complete with new stainless washer and plated 3/8 ” BSCy location nut.
Laser cut in hot rolled 304 stainless steel, can be polished or used as supplied but cures the rust problems.
All brake components are fitted at the discretion and responsibility of the purchaser, no testing or approval is offered or given